DeltaWASP 20 40 Turbo2 (w/ Dual Extruder)

Delta FFF 3d Printer with Dual Extrusion (Wasp Zen Extruder)


Maximum printing volume: Ø200 x h400 mm;
Close printing chamber;
Minimum layer height: 50 micron;
Maximum printing speed(*): 500 mm/s;
Maximum travel speed(*): 1000 mm/s;
Acceleration(*): 15.000 mm/s2;
Maximum temperature of the heated bed: 120 C°;
* All speed data refers to the use of the printer with mono extruder 0.4 mm nozzle diameter.

Machine Revisions
  1. DeltaWASP 20 40 Turbo2 (w/ Dual Extruder)
Available at

Discuss this Machine on forum.fablabs.io